Difference between revisions of "Report Center"

From Tubetracker
Jump to: navigation, search
(Rack Snapshot)
m (Fixed Image Alignment)
Line 2: Line 2:
  
 
== Opening the Report Center ==
 
== Opening the Report Center ==
# Click '''Report Center''' in the left-hand menu under the heading '''Validator'''.[[image:report_center_menu.jpg|left|frame|'''Report center menu''']]<br clear="all" />[[image:report_center_main.jpg|left|frame|'''Report Center screen''']]<br clear="all" />
+
# Click '''Report Center''' in the left-hand menu under the heading '''Validator'''.[[image:report_center_menu.jpg|none|frame|'''Report center menu''']]<br clear="all" />[[image:report_center_main.jpg|none|frame|'''Report Center screen''']]<br clear="all" />
 
# The main Report Center screen will then appear. There are two methods to access a validation report.
 
# The main Report Center screen will then appear. There are two methods to access a validation report.
 
## ''Batch Number Search'': If the validation batch number is known, it can be typed into the search at the top of the screen. If the validation batch is found, the Summary Report will than appear.
 
## ''Batch Number Search'': If the validation batch number is known, it can be typed into the search at the top of the screen. If the validation batch is found, the Summary Report will than appear.
Line 12: Line 12:
 
=== Report Summary ===
 
=== Report Summary ===
 
:The Report Summary appears at the top of every report and lists the basic information about the Validation Batch.
 
:The Report Summary appears at the top of every report and lists the basic information about the Validation Batch.
[[image:report_center_common_summary.jpg|left|frame|'''Report summary''']]<br clear="all" />
+
[[image:report_center_common_summary.jpg|none|frame|'''Report summary''']]<br clear="all" />
 
* '''Institution''': The name of your institution.
 
* '''Institution''': The name of your institution.
 
* '''Batch''': The system assigned validation batch number.
 
* '''Batch''': The system assigned validation batch number.
Line 25: Line 25:
 
=== Report Totals ===
 
=== Report Totals ===
 
:The Reports Totals section lists information about the containers, racks, and specimens that were affected by a validation batch and is displayed directly below the Report Summary section.
 
:The Reports Totals section lists information about the containers, racks, and specimens that were affected by a validation batch and is displayed directly below the Report Summary section.
[[image:report_center_common_totals.jpg|left|frame|'''Report totals''']]<br clear="all" />
+
[[image:report_center_common_totals.jpg|none|frame|'''Report totals''']]<br clear="all" />
 
* '''Expected''': The total number of container, racks or specimens that have been entered into tube.tracker and are present at the time of validation.
 
* '''Expected''': The total number of container, racks or specimens that have been entered into tube.tracker and are present at the time of validation.
 
* '''Actual''': The actual number of containers, racks or specimens that were validated.
 
* '''Actual''': The actual number of containers, racks or specimens that were validated.
Line 34: Line 34:
 
=== Rack Snapshot ===
 
=== Rack Snapshot ===
 
:The Rack Snapshot is a frozen look at how the rack is stored in tube.tracker at the time of the validation event.
 
:The Rack Snapshot is a frozen look at how the rack is stored in tube.tracker at the time of the validation event.
[[image:report_center_common_rack_snapshot.jpg|left|frame|'''Rack Snapshot''']]<br clear="all" />
+
[[image:report_center_common_rack_snapshot.jpg|none|frame|'''Rack Snapshot''']]<br clear="all" />
 
* '''POS''': Position of the specimen within the rack
 
* '''POS''': Position of the specimen within the rack
 
* '''Spec ID''': Specimen ID
 
* '''Spec ID''': Specimen ID
Line 41: Line 41:
 
== Summary Report ==
 
== Summary Report ==
 
:The Summary Report is designed to give the user the most relevant information in the briefest amount of space. There are two sections that can appear on a Summary Report in addition to the two common report elements listed above.
 
:The Summary Report is designed to give the user the most relevant information in the briefest amount of space. There are two sections that can appear on a Summary Report in addition to the two common report elements listed above.
[[image:report_center_summary_report.jpg|left|frame|'''Summary report''']]<br clear="all" />
+
[[image:report_center_summary_report.jpg|none|frame|'''Summary report''']]<br clear="all" />
  
 
=== Missing Specimens ===
 
=== Missing Specimens ===
 
:This section of the Summary Report will display all specimens that were not validated and were marked as missing. The table displayed is split into three columns.
 
:This section of the Summary Report will display all specimens that were not validated and were marked as missing. The table displayed is split into three columns.
[[image:report_center_summary_missing_specimens.jpg|left|frame|'''Missing specimen report section''']]<br clear="all" />
+
[[image:report_center_summary_missing_specimens.jpg|none|frame|'''Missing specimen report section''']]<br clear="all" />
 
* '''Spec ID''': This column displays the Specimen ID of the missing specimen.
 
* '''Spec ID''': This column displays the Specimen ID of the missing specimen.
 
* '''Pos''': This column displays the position in the rack the specimen occupies.
 
* '''Pos''': This column displays the position in the rack the specimen occupies.
Line 59: Line 59:
 
=== Added Specimens ===
 
=== Added Specimens ===
 
:This section will appear below the Missing Specimens section if any specimen were marked as missing during the validation. Otherwise, this section will appear immediately below the Report Totals. This section's table displays the same columns as the Missing Specimens.
 
:This section will appear below the Missing Specimens section if any specimen were marked as missing during the validation. Otherwise, this section will appear immediately below the Report Totals. This section's table displays the same columns as the Missing Specimens.
[[image:report_center_summary_added_specimens.jpg|left|frame|'''Added specimens report section''']]<br clear="all" />
+
[[image:report_center_summary_added_specimens.jpg|none|frame|'''Added specimens report section''']]<br clear="all" />
  
 
* '''Spec ID''': This column displays the Specimen ID of the Added Specimen
 
* '''Spec ID''': This column displays the Specimen ID of the Added Specimen
Line 67: Line 67:
 
== Full Report ==
 
== Full Report ==
 
:The Full Report displays all specimens, racks and containers involved in the validation batch. Each specimen is displayed in a three column table.
 
:The Full Report displays all specimens, racks and containers involved in the validation batch. Each specimen is displayed in a three column table.
[[image:report_center_full_report.jpg|left|frame|'''Full report''']]<br clear="all" />
+
[[image:report_center_full_report.jpg|none|frame|'''Full report''']]<br clear="all" />
  
 
* '''Spec ID''': This column displays the Specimen ID of the specimen.
 
* '''Spec ID''': This column displays the Specimen ID of the specimen.

Revision as of 15:48, 19 December 2013

The report center is a central area from where all validation reports can be viewed.

Opening the Report Center

  1. Click Report Center in the left-hand menu under the heading Validator.
    Report center menu

    Report Center screen

  2. The main Report Center screen will then appear. There are two methods to access a validation report.
    1. Batch Number Search: If the validation batch number is known, it can be typed into the search at the top of the screen. If the validation batch is found, the Summary Report will than appear.
    2. Select a Batch: Under the batch number search box a list of recent validation batches is displayed with the most recent batch at the top. Find the rack or container used in the validation and click on its ID. This will bring up the Summary Report.

Common Report Elements

Both the Summary Report and the Full Report share certain elements. These elements appear at the top of each report

Report Summary

The Report Summary appears at the top of every report and lists the basic information about the Validation Batch.
Report summary

  • Institution: The name of your institution.
  • Batch: The system assigned validation batch number.
  • Printed Date: Date and time the report was generated.
  • Validation Date: Date and time of the validation batch.
  • Validation Type: Specifies which type of validation, container or rack, was performed.
  • Container/Rack Name: The ID of the rack or container.
  • From: Name of the container from which the container or rack originated.
  • To: Name of the container to which the container or rack was transferred.
  • By: Username of the person who performed the validation.

Report Totals

The Reports Totals section lists information about the containers, racks, and specimens that were affected by a validation batch and is displayed directly below the Report Summary section.
Report totals

  • Expected: The total number of container, racks or specimens that have been entered into tube.tracker and are present at the time of validation.
  • Actual: The actual number of containers, racks or specimens that were validated.
  • Missing: The number of missing containers, racks, or specimens.
  • Found: This field will contain a number only if there were any missing specimens reported during the initial validation. If any specimens were eventually found after the validation, the total number of which will be displayed.
  • Added: The number of extra specimens added during the validation.

Rack Snapshot

The Rack Snapshot is a frozen look at how the rack is stored in tube.tracker at the time of the validation event.
Rack Snapshot

  • POS: Position of the specimen within the rack
  • Spec ID: Specimen ID
  • Entered: Local data and time the specimen was entered into tube.tracker

Summary Report

The Summary Report is designed to give the user the most relevant information in the briefest amount of space. There are two sections that can appear on a Summary Report in addition to the two common report elements listed above.
Summary report

Missing Specimens

This section of the Summary Report will display all specimens that were not validated and were marked as missing. The table displayed is split into three columns.
Missing specimen report section

  • Spec ID: This column displays the Specimen ID of the missing specimen.
  • Pos: This column displays the position in the rack the specimen occupies.
  • Note: This column displays the validation note if one exists. If a specimen was eventually deleted, the report will display the delete event information in this column.

Other information may also appear below a specimen's entry in this table. There are four additional entries that can appear:

  • Validation Event Note: If a specimen was eventually found or deleted, the validation note will display below the specimen's entry.
  • Found Event: If a specimen was found, an entry will appear stating when it was found and by whom.
  • Delete Event: If a specimen was deleted, an entry will appear stating when it was deleted and by whom.
  • Other Specimen Notes: If there are any notes attached to the missing specimen, they will display in a separate box below all of the previous three events.

Added Specimens

This section will appear below the Missing Specimens section if any specimen were marked as missing during the validation. Otherwise, this section will appear immediately below the Report Totals. This section's table displays the same columns as the Missing Specimens.
Added specimens report section

  • Spec ID: This column displays the Specimen ID of the Added Specimen
  • Pos: This column displays the position in the rack the specimen now occupies.
  • Note: This column displays the validation note if one exists.

Full Report

The Full Report displays all specimens, racks and containers involved in the validation batch. Each specimen is displayed in a three column table.
Full report

  • Spec ID: This column displays the Specimen ID of the specimen.
  • Pos: This column displays the position in the rack the specimen occupies.
  • Note: This column displays the validation note if one exists.

If a specimen was marked as missing, the specimen's table entry will appear with a red background color and will display any extra information pertaining to the missing specimen. Consult the Summary Reports description of the missing specimens section for a list of extra information that may appear.

If a specimen was added during the validation process, the specimen's table entry will appear with a blue background color and the note column will state when the specimen was added and who added it.

Back to the Online Documentation